|
|
|
|
|
|
MALEIC ANHYDRIDE (MA) Maleic Anhydride is mainly used for Unsaturated Polyester Resin for housing units and automobiles, fumaric acid for food and succinic acid. We are greatly contributing to the cost decrease for our customers by producing high quality goods at low costs through constant researches and once enlarged installation. Production ......
|
|
|
|
|
| |
|
|
|
|
POLYOLEFIN ELASTOMERS LC670, LS100 ETC LC670 is an ethylene-octene copolymer produced using LG Chem's metallocene polymerization catalyst and solution process technology. This resin is an excellent impact modifier for plastics and offers unique performance capabilities for compounded products. Regulatory requirements LC670 complies ......
|
|
|
|
|
| |
|
|
|
|
<!-- @page { margin: 2cm } TD P { margin-bottom: 0cm } P { margin-bottom: 0.21cm } --> PVC Specifications <!-- @page { margin: 2cm } TD P { margin-bottom: 0cm } P { margin-bottom: 0.21cm } --> <!-- @page { margin: 2cm } TD P { margin-bottom: 0cm } P { margin-bottom: 0.21cm } -->
|
|
|
|
|
| |
|
|
|
|
PVC PASTE RESIN P450, PB1202 PB1202, homopolymer made by micro-suspension seeded polymerization, PVC Resin has a fluid property similar to Newtonian fluidity (low-viscosity) It is mainly used for non-foaming products by coating, also used for foaming products. It is wide used for products in which plasticizer is rarely added. Main Applications ......
|
|
|
|
|
| |
|
|
|
|
EVA 18% TAISOX, HONAM VS430 AND POLENE N8038 (*) Properties routinely measured during the standard quality control procedure.
|
|
|
|
|
| |
|
|
|
|
Technical Data Sheet Monopropylene Glycol (MPG) CAS No. 57-55-6 Other names: 1,2-propanediol, propane-1,2-diol TYPICAL PHYSICAL PROPERTIES Parameter Conditions Units Value Molecular weight g 76.1 Boiling point °C 188 Specific gravity 25°C 1.035-1.037 Refractive index n 20 Viscosity 20°C mPa.s 62 ......
|
|
|
|
|
| |
|
|
|
|
EPICHLOROHYDRIN 99.9% Shipper:Tianjin Bohai Chemical Industries I&E Corp. Commodity: Epichlorohydrin 99.9% Min Shipping Marks N/M Quantity: 176Mt=800Drums Weight: 176, 000Kgs Destination: Nhava Sheva, Inda Survey Place: At The Loading Port(Xingang) This Is To Certify That We, The Undersigned,Have Inspected The Quality Of The Above ......
|
|
|
|
|
| |
|
|
|
|
High Density Polyethlene <!-- @page { margin: 2cm } P { margin-bottom: 0.21cm } --> TAISOX High Density Polyethylene plastic resin in the product manufactured by CSTR low-pressure slurry process from Maruzen. Japan. TAISOX HDPE is a high-impact and high-stiffness product and has distinguished chemical resistance, environmental stress crack ......
|
|
|
|
|
| |
|
|
|
|
Engineering thermoplastics are sold in much lower quantities and are thus more expensive per unit weight. Despite this, they are widely used in everyday products. For example ABS is used to manufacture car bumpers, dashboard trim and Typically, an engineering plastic is chosen for its range of enhanced physical properties e.g. polycarbonate is highly ......
|
|
|
|
|
| |
|
|
|
|
SBR1502, SBR1712 AND ALL GRADES OF SBR, NR, BR, EPDM, RSS3, RSS4, RSS5 FROM TAIWAN, JAPAN, KOREA. BRANDS : KOREA KUMHO, CHINA GPRO, JAPAN JSR, TAIWAN TSRC AND IRAN SBR
|
|
|
|
|
| |
|
|
|
|
Linear Low Density Polyethlene <!-- @page { margin: 2cm } TD P { margin-bottom: 0cm } P { margin-bottom: 0.21cm } --> Composition and Information on the Components Hazard Identification Highly flammable. Irritating to eyes. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and ......
|
|
|
|
|
| |
|
|
|
|
Linear Low Density Polyethlene Linear Low Density Polyethylene · Blown Film Grade Application Agricultural & indutrial film Feature Characteristics: Good tensile & tear strength, High clarity, mechanical strength & sealing properties - Additives : Medium slip agent, Medium antiblocking agent Properties <!-- @page { margin: 2cm ......
|
|
|
|
|
| |
|
|
|
|
PATHALIC ANHYDRIDE (PA) PA is widely used as phthalate plasticizer, unsaturated polyester resin, dye intermediate. PA manufacturing method is divided into ortho-xylene based process and naphthalene based process by used raw methrials and fixed and fluidized bed type by used catalyst. Since our subsidiary, factory produced PA for the first ......
|
|
|
|
|
| |
|
|
|
|
MIBK SPECIFICATION MIBK is a stable, colorless liquid with a pleasant odor. It is both a medium-boiling and a medium-evaporating solvent. Typical Properties Note 1: Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III Section 313 Note 2: Hazardous Air Pollutants listed under Title III of the Clean Air Act ......
|
|
|
|
|
| |
|
|
|
|
MULBERRY RAW SILK 20/22D, 40/44D 28/32D AND OTHERS 4A, 3A, 2A GRADES DUPION SILK YARN 100/120D XX/X GRADES FROM CHINA DIFFERENT MILLS TUSSAH SILK WATER REELED 33/37D 2A/A GRADES DALIAN,CHINA SPUN SILK YARN 60/2N, 120/2N, 210/2N RED BLOSSOM BRAND SILK NOIL YARN 20/1, 10/1 AND 30/1 CHINA POLYESTER FILAMENTS YARN ALL COUNTS NYLON FILAMENT YARN ......
|
|
|
|
|
| |
|
|
|
|
Acetone Contents Acetone is the raw material of MMA(Methyl Metha Acrylate), BPA, ascorbic acid(Vitamin C), etc. In addition, acetone is widely used as solvents for synthetic resins, rubber, oil paper and paints, as well as for acetyl cellulose, nitro cellulose, etc. By applying the cumene process, LG Petrochemical produces acetone ......
|
|
|
|
|
| |
|
|
| |
|
|
|
|
TOLUENE DI ISOCYANATE (TDI 80/20) Lupranate T80 toluene diisocyanate (TDI) is an 80% - 20% mixture of the 2,4 and 2,6 isomers of toluene diisocyanate. This product is used in the preparation of polyurethane foams, prepolymers and elastomers. TDI is stable but might cause uncontrollable polymerization and rapid evolution of heat from the product ......
|
|
|
|
|
| |
|
|
|
|
BISPHENOL-A Structure & Characteristics (CH3)2C (C6H4OH)2. BPA is an empetus powder with white color Manufacturing Method BPA is produced through a catalyzed condensation reaction of phenol with acetone Main Derivatives Bisphenol-A (BPA) is used primarily to make polycarbonate and epoxy resins, both of which are used ......
|
|
|
|
|
| |
|
|
|
|
Polyol Ester polyol is being produced through the effects of dibasic acid and glycol's esterification, and the high molecular material is being used in a variety of ways such as sandwich panels, PIR Panel , adhesives, artificial wood, fridges, shift foams in refrigerating containers, etc. Since commencement of production in 1999, our enterprise has ......
|
|
|
|
|
| |
How to export, what is the procedure for clearance of imported and export goods...
Foreign trade Policy 2004 - 09
Know exchange rates for conversion of foreign currency
Get Information on Shipping ports in India and abroad
Information on Indian embassies and consulates abroad