|
|
| Description/Specification : |
An excellent quality range of Foot Wear Tester (Normal), our clients can avail from us. Foot wear is the first line of defence against electrostatic charges builds up on the human body. It is designed to carry away this charge as soon as it is generated. At the same time Foot wear must remain electrically safe for the user. Thus, it is important to test every Foot wears regularly.
In order to protect the sensitive electronic components the maximum foot wear resistance should not be more than 100 Meg ohms on the other end. The resistance should not be less than 0.75 Meg ohms as protection to the wearer from dangerous level of the voltage and current flow.
Our superior quality Foot Wear Tester checks these parameters under actual operating conditions with the foot wears. Foot Wear Tester clearly indicates weather or not the resistance of the foot wears system including the wearer is at least 0.75 Meg ohms and note more than 100 Meg ohms respectively.
Specification :
Range : Foot wear 0.75 to 100 Meg ohm
Indications : Pass – Green Led ,
Low & High Fail – Red Led With Audible alarm,
Test actuation : By gently pressing metal sensor plate
Accuracy : +/- 10%
Power Supply : 9 Volt Battery,
Low Battery : Warning at 7.0 V
Dimensions : 135 x 70 x 30 mm,
Weight : App. 150 Gms with battery
Calibration : Recommended every 12 months,
Warranty : 12 Months
Optional : Instruction Board, Carry Case & Door Locking System.
|
| Company Name : |
KINETIC POLYMERS |
| Address : |
D-13/2, Road No-3, Phase-1, I.D.A., Jeedimetla,
Hyderabad - 500055, Andhra Pradesh , India
|
| Contact Person : |
Mr. Rajesh Jain
(Technical Director)
|
| Phone : |
91-40-65278344/65408277/23093957 |
| Mobile : |
+919246208277, +919866117634 |
| Fax : |
91-40-23093957 |
 |
